Call Us: +971 4 4232882
HDPE
HDPE is polymerized from ethylene to produce a plastic with excellent stiffness and environmental stress crack resistance. It has superb chemical resistance and low water absorption, and is easily processed and machined.
The main applications of HDPE include blow-moulded containers, crates, drums, blown film and pipe. It is ideally suited to food contact applications. Safripol HDPE has carbon black filled grades for the pipe industry as well as natural grades for other applications such as blow moulding, injection moulding and extrusion.
List of HDPE
Product Name
MFI(1)
Density
Properties
Applications / Processes
Injection Moulding
B 7750
28
0.952
-
Domestic ware, buckets, freezer containers, caps
C 7260
23
0.958
-
Bottle & Other storage crates, buckets & lids
D 7255

11

0.949

-

Thick walled articles such as crates, refuse bins, open drums and closures
D 7255HL

11

0.949

UV stabilized

Thick walled articlws such as crates, refuse bins, open drums and closures
Monofilament Extrusion & Film
F 7740F2

1.7

0.946

Slip, Antistatic

Monofilaments, streched tapes, lamination and co-ex films and drip bag over pouches
Small Part Blow Moulding
F 7665

2.0

0.957

-

Containers for milk and fruit juice, toiletries, cosmetics and general householdgoods up to 5 litres
F 7650

1.7

0.950

-

Containers for toiletries, cosmetics and household and industrial chemicals up to 20 litres
H 4765

1.4

0.958

-

Containers for milk and fruit juice, toiletries, cosmetics and general household goods up to 20 litres
Large Part Blow Moulding
M 7650

0.35

0.953

-

Large containers greater than 20 litres, extrusion of sheet and optical fibre sheathing
M 6650
0.20
0.953
-
Large containers of up to 250 litres for industrial chemicals
Film Extrusion
M 9255F
0.30
0.953
-
Vest type carrier bags, thin gauge bread & refuse bags
Pipe
IMPACT 100®

0.30

0.957

Carbon black

Small & large diameter pressure pipes for water, irrigation, effluent and gas mains
Polypropylene
PP is a lightweight, moderately high melting point plastic with high stiffness, hardness and strength. It is produced from propylene monomer as a homopolymer or as a copolymer with ethylene.
PP is used in the manufacture of injection-moulded articles, blow-moulded containers, pipe, sheet and textile fibres. It is often used for outdoor applications but is UV resistant only if appropriately stabilized. PP has a good resistance to fatigue and can therefore be used as a living hinge such as those found on flip-top bottles.
Safripol produces a variety of PP grades as impact copolymers, random copolymers and homopolymers for injection moulding, extrusion, blow moulding, thermoforming and fibres.
List of PP
Product Name


MFR(1)

Flex
Mode
(MPa)
Charpy
Impact
(23°C)
Charpy
Impact
(0°C)
Charpy
Impact
(0°C )
Properties


Applications / Processes


Impact Copolymers
C770-70RNA


70


1050


7.5


5.0


4.2


Nucleated, antistatic

Injection moulding - Thin wall containers, yoghurt cups, margarine tubs, housewares, lids, caps & closures
C740-25RNA

25

900

10

7

5.5

Nucleated, antistatic
Nucleated, antistatic Injection moulding - Ice-cream containers, frozen food containers
C765-15NA

15

1200

12

-

6.5

Nucleated, antistatic
Injection moulding - Crates, boxes, toys, pails, household appliances
C722-07NA

7.5

1250

10.5

5.5

-

Nucleated, antistatic
Injection moulding - Houseware, appliances, battery cases and containers
C142-01N

1.4

1200

-

7

5

Nucleated

Extrusion & injection moulding - Thin walled sheet and profile extrusion
Random Copolymers
Advance™ 400
40

1000

5

2

-

Nucleated, antistatic
Injection moulding - Thin wall packaging, food and cosmetic containers, aerosol dust covers
Advance™ 150

1.5


1000


11


3


-


Nucleated, UV stabilized
Extrusion, blow moulding & thermoforming - Toiletry containers, petroleum jelly jars, high clarity bottles, film for retort applications
Homopolymers
H712-52RNM


50


1500


2.3


-


-


Nucleated


Injection moulding coating - Thin walled food and cosmetic packaging, houseware & appliances, caps & closures
H500-25RG

26

1370

3.0

-

-

Anti-gas fading
Extrusion fibre spinning - Health & hygiene products, geotextiles, carpet face yarns
H504-12M

12

1360

2.3

-

-

-

Extrusion and injection moulding - High tenacity yarns, fibres, tufted carpets
H707-12NSM

12

1500

2.3

-

-

Nucleated, slip
Injection moulding _ Houseware & appliances, garden furniture, caps & closures
H713-06

5.4

1450

4.5

-

-

-

Injection moulding - Caps and closures, domestic ware, slit tapes for woven bags
H506-04

3.9

1320

4.4

-

-

-

Extrusion - Slit film tapes, tapes and monofilaments, ropes and twines
H511-03

3.3

1350

5.8

-

-

-

Extrusion - Slit film tapes, tapes and monofilaments, ropes and twines
H510-02

2.0

1360

6.8

-

-

-

Extrusion - injection & blow moulding - Hinged closures, monofilaments, strapping
H106-02NSA


2.0


1480


6.0


-2.2


-


Nucleated, slip, antistatic
Extrusion & injection moulding - Carbonated soft drink closures